البحث Search the whole station

PGP 051 parker cast iron hydraulic gear pump external gear pump
PGP 051 parker cast iron hydraulic gear pump external gear pump
PGP 051 parker cast iron hydraulic gear pump external gear pump
PGP 051 parker cast iron hydraulic gear pump external gear pump
PGP 051 parker cast iron hydraulic gear pump external gear pump

7049112042-R Parker-Commercial Intertech hydraulic gear pump for JCB 3CX backhoe loaders

  • التناوب عكس اتجاه عقارب الساعة (بالنظر من طرف العمود)
  • العمودSAE splined
  • شفة التركيبSAE B 4 hole mounting flange
  • Speed500 – 3500 rpm
  • الوزن20KG
  • السعر $100~$400
المنتج
المعلمة
التطبيق
اتصل بنا

7049112042-R,7049112042 3139115017 hydraulic pump

الرسالة

*
*

PRODUCT INTRODUCTION
RCHC’s RPGP640 series fixed/positive displacement gear pumps offer the most volumetrically efficient and power dense solution due their interlocking, two-piece cast iron design, making the 600 series ideal for engineered mobile equipment solutions demanding energy efficient, high performing hydraulic systems. The 600 series is a type of cast iron pump widely used in the most demanding applications.Features/Benefits:Two-piece, interlocking body construction for high efficiency and high pressur, Cast iron pumping sections for durability,Journal bushings for long life,Pressure balanced thrust plates for high efficiency,Multiple sections available.Sizes from 30 to 80cc, Operating pressures up to 275 bar (4,000 psi),Speeds up to 3,000 rpm, CW, CCW, and Bi-rotational pumps available, SAE shafts, flanges and porting available.

المنتج FeaturesDescription
Pump TypeHeavy-duty, cast iron, external gear.
MountingSAE, rectangular, thru-bolt standardspecials on request.
PortsSAE and metric split flanges and others
العمود StyleSAE splined, keyed, tapered, cylindrical tang drive, specials on request
Pump Speed500 – 3000 rpm, see Technical Data
DriveDrive direct with fexible coupling is recommended.
Axial / Radial loadUnits subject to axial or radial loads must be specifed with an outboard bearing.
Maximum Operating الضغطOperating range 0.8 to 2 bar abs.
Min.inlet pressure 0.5 bar abs.Short time
without load.Consultation is recommended.
FluidsHydraulic oil HLP, DIN 51524-2
Fluid TemperatureRange of operating temperature -15 to +80 °C. Max.permissible operating pressure dependent on fuid temperature. Temperature for cold start -20 to -15 °C at speed ≤ 1500 rpm. Max.permissible operating pressure dependent on fuid temperature.
Fluid viscocityRange of operating viscosity 8 to 1000 mm²/s. Max.permissible operating pressure dependent on viscosity. Viscosity range for cold start 1000 to 2000 mm²/s at operating pressure p≤10 bar and speed n ≤1500 rpm.
Direction of Rotation (looking at the driveshaft)Clockwise, Counter Clockwise, Bi-Direction

RPGP620 640 -Technical-Manual.pdf

Other Products

Company Profile

Ruichen Hydraulic Machinery Manufacturing Co., Ltd., established in 2000, is a global provider of high-quality hydraulic solutions. Located in Hebei Province, China, our 55,000 m² factory employs over 300 staff, including 15 engineers and 5 senior engineers. We specialize in cast iron gear pumps, gear motors, and hydraulic control valves, widely used in construction machinery, agricultural equipment, mining, and industrial applications.

Quality Certificate

المنتجات الموصى بها

التحميل...

经是 最 最 一 最 ペ 月 年

توسع أكثر!